In the intricate process of photovoltaic project design and construction, determining and adjusting the location of transformers has always been a crucial step that requires meticulous attention. Whether it's during the early planning stage or during changes during the construction process, precise control over the transformer location plays a significant role in the smooth progression of the project.
The Candela3D software has newly introduced the "Batch Modify Transformer Locations or Import New Transformers" feature, providing users with an efficient and convenient operation experience.
The location and usage introduction of the function are shown in the following pictures and videos:
Here are a few efficient usage scenarios for this feature:
Scenario 1: The Transformer location has been determined in the early stage, and rapid batch Import is required
At the beginning of a project, if the locations of transformers have been determined by other means, this feature can be used to directly import the transformer locations in bulk, easily completing the initial location setup.
Scenario 2: The construction site does not match the design, requiring batch modification of locations
The construction site is complex and constantly changing, often resulting in inconsistencies between the actual coordinates of the transformer location and the design. With this function, precise positioning can be achieved based on the transformer coordinates fed back from the construction site. With a single click, the transformer location can be modified in bulk to match the actual coordinates of the construction site.
Scenario 3: Transformer Location Changes, Easily Handled
When there is a change in the Transformer's location, traditional methods require re-importing the entire array, which is cumbersome and prone to data confusion. With this feature, simple operations can quickly modify the Transformer's location without the need to re-import the entire array.
Scenario 4: Reverse Import, Function Upgrade
During the reverse import process, users can choose to import only transformers, which not only enables precise import of transformer locations but also simultaneously imports the transformer azimuth angles. This feature provides richer data support for optimization and adjustment in the later stages of the project, facilitating designers to review and refine the design scheme from multiple dimensions.
The "Modify Transformer Locations or Import New Transformers" feature of Candela3D software significantly simplifies the design change process, enabling photovoltaic project designers and construction personnel to effortlessly handle various adjustments to transformer locations, thereby enhancing work efficiency and reducing the costs and time losses associated with design changes. If you are still struggling with transformer location adjustments in photovoltaic project design, why not give this new feature of Candela3D software a try? We believe it will bring you unexpected convenience.
Article Comments（0）